WST FBM200A Betreibershandbuch PDF herunterladen (Seite 9)

SETTING UP THE APPLICATION

Click on the Beacon Monitor icon. The Beacon Monitor application will

start and the following screen will be displayed:

The Connection Status in the Status section shows a red X, indicating

the receiver is not connected.

Connect the FBM200 receiver to a USB port on the computer using the

supplied USB cable. This connection is both the power supply and the

communication link to the unit. When the FBM200 receiver is located,

the Connection Status in the Status section will show Connected.

The LED Indicator on the top of the unit will glow RED when first

plugged in, then will flash green when operating normally.

There are two main viewing modes:

1. Monitor Mode

2. Setup Mode

The following sections will discuss the setup and operation of the

software and hardware.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Keine Kommentare

WST FBM200A Betreibershandbuch Seite 9